The HART protocol superimposes audio digital signals on 4~20 mA analog signals. The digital signal amplitude is 0.5 mA and the data rate reaches 1200 b/s. 1200 Hz represents logic "1" and 2200 Hz represents logic "0". Enables two-way digital communication. HART communication has the characteristics of simultaneous point-to-point 4 ~ 20 mA analog and digital communication, multi-station communication methods, and multiple transmissions.The HT1200M is compatible with the SYM20C15 and HT20C15 and with ON OnSemi's A5191HRT and HT2015.

Many of microcyber products have passed FF certification, PA certification, HART certification, NEPSI explosion-proof certification, etc. And our company has ISO 9001 certification.To establish a long-term business relationship is our target.

The APC3 Fieldbus Communication Controller (DP) is a highly advanced ASICs chip specifically designed for the development of PROFIBUS DP intelligent slave stations. With its robust features and state-of-the-art technology, the APC3 enables seamless communication and reliable data transfer in industrial automation applications.

HT1200M is a low-power modem chip that can be used in HART devices, which only needs a small number of external components to complete the modulation and demodulation of HART signals.

HT1200M is a low-power modem chip that can be used in HART devices, which only needs a small number of external components to complete the modulation and demodulation of HART signals.

G0313 Modbus to FF Gateway is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to FF Gateway communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to FF device variable output.

APC3 is a fieldbus dedicated chip for the development of PROFIBUS DP intelligent slaves, supporting the complete DPV0 protocol. APC3 is fully compatible with SPC3LV and VPC3 working in DPV0/3.3V/1.5K dual-port RAM mode.

NCS-IF105 converter Quadruple Channel Current 4-20mA to Fieldbus Converters As intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces the expense of installation and maintenance.

Precautions for installing pressure transmitter

Fieldbus WirelessHART Development Toolkit HART can help device manufacturer to quickly and efficiently develop and test WirelessHART field device, to shorten time to market, improve performance, and improve core competitiveness.