Fieldbus Accessories

FF H1 PROFIBUS PA PROFIBUS DP HART Partners
1. OEM service
2. Certification pre-test support
3. Certification test support
4. System integration test support
5. Same hardware for FF H1 & PROFIBUS PA
6. FISCO certified

MCAFD8 Active Fieldbus Distributor is suitable for the FF H1 and PROFIBUS PA fieldbus application.Through the distributor, field devices use the topology of the main - branch to connect the system. Each distributor has eight branches.There’s built-in automatic bus terminal. LED status indicator can rapidly diagnosis main line and branch line short circuit state, isolate the fault section automatically. Multiple protection function of the distributor can ensure the safe operation of the system.

NCS-BP105 Fieldbus Power Conditioner
NCS-BT105 Fieldbus Terminator
1. Bus power supply, suitable for fieldbus conforming to IEC 61158-2 standard
2. Comply with the FF-831 bus power supply test specification
3. Support power supply redundant connection
4. Servo voltage output, meeting the requirements of long distance power supply

MCAFD4/8 Active Fieldbus Distributor
1. Bus power supply, suitable for fieldbus conforming to IEC61158-2 standard
2. LED indicators for bus status
3. Short circuit protection and breakdown equipment isolation
4. No effect of other normal working fieldbus devices when installing or uninstalling
5. Low installation cost, simple electric maintenance, waterproof and dust proof of housing joint
6. No polarity of fieldbus input. Not necessary to consider polarity of fieldbus devices
7. Each MCAFD4/8 can connect max 4/8 devices
8. Protection Grade: IP67

Fieldbus Power Conditioner/NCS-BP105 Fieldbus Power Conditioner
1. Bus power supply, suitable for fieldbus conforming to IEC 61158-2 standard
2. Comply with the FF-831 bus power supply test specification
3. Support power supply redundant connection
4. Servo voltage output, meeting the requirements of long distance power supply

Remote Test Fieldbus Terminator Power Conditioner Flow Conditioner
NCS-BP105 Fieldbus Terminator mounted in two side of the bus, applies to Foundation Fielbus and Profibus PA control system in order to provide impedance matching and convert bus current to voltage.

NCS-BT105 Fieldbus Terminator mounted in two side of the bus, applies to Foundation Fielbus and Profibus PA control system in order to provide impedance matching and convert bus current to voltage.

NCS-HM105 HART Modem--As the leading company of industrial Internet of things, Microcyber Corproation has decades of experience in industrial Internet of things, HART MODEM is one of the hottest products on Microcyber.HART signal MODEM (HART MODEM) is a necessary tool for instrument manufacturers to upgrade products and control signal conversion on site.

MCFD1(RS485)MCFD1(RS485) is suitable for MODBUS-RTU, MODBUS-ASCII, PROFIBUS DP, etc. , which are tallied with RS-485 physical layer standard.
1. Bus power supply, suitable for fieldbus conforming to IEC61158-2 standard
2. LED indicators for bus status
3. Short circuit protection and breakdown equipment isolation
4. No effect of other normal working fieldbus devices when installing or uninstalling
5. Low installation cost, simple electric maintenance, waterproof and dust proof of housing joint
6. No polarity of fieldbus input. Not necessary to consider polarity of fieldbus devices
7. Each MCAFD4/8 can connect max 4/8 devices
8. Protection Grade: IP67