NCS-TT106 Temperature Module FF H1/ PROFIBUS PA/ HART
- Microcyber
- China
- In Stock
- 500 Sets/Month
NCS-TT106 Temperature Module supports FF Hl, PROFIBUS PA and HART protocoIs and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high performance.
1. Support 4 types of thermal resistance and 8 types of thermocouple
2. Thermal resistance supports 2-wire, 3-wire and 4-wire
3. The cold junction compensation accuracy of thermocouple can reach ±0.15 ℃
4. High precision (better than grade 0.1), low temperature drift (better than ±50ppm/℃ )
5. FCG interoperability test certification (ITK 6) and PNO interoperability test certification (PA profile 3.02), comply with HART 7
6. CE, explosion-proof (intrinsically safe, flameproof) certification
NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT106 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.
NCS-TT106 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.
NCS-TT106 supports HART, FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.
NCS-TT106 Temperature ModuleFeatures：
Support multiple thermal resistances and thermocouples
Thermal resistance supports2/3-wire connection mode
Thermocouple can use cold end compensation function
NCS-TT106 Temperature Module Basic Parameters：
Bus Power Supply: 9～32VDC
Current consumption (static)：≤14mA（FF/PA）
11V～35 VDC(HART) Input Signal: Pt100, Pt1000, Cu50, Cu100 Ω, 0, 0 to 500 ~ 4000 Ω Resistance, B, E, J, N, K, R, S, T eight degrees of Thermocouple, -100mV ~ 100mV Voltage Signal
The Channel Number: Single Channel
Fieldbus Protocol: FF/PA/HART
Insulation: Between the Terminal and the Housing：500Vrms(707VDC)
Operating Temperature: -40℃～85℃
Humidity Range: 0%～95%RH
Starting Time: ≤5secs.
Turnover Time: 0.5secs.
Electromagnetic Compatibility: In Line with the GB/T 18268-2010
Explosion-Proof Sign: Ex ia IIC T4 Ga (HART)
Structural Parameter：
Dimensions: Φ45*23mm
Shell Material: Nylon
Thermal resistance technical index
RTD Normal temperature accuracy index（25℃）
Signal type | Range | Recommended range（℃） | Accuracy | Temperature drift (per ℃) |
Resistance signal | 0~500Ω | 0~500Ω | ±0.04Ω | ±0.001Ω |
0~4000Ω | 0~4000Ω | ±0.35Ω | ±0.015Ω | |
PT100 | -200~850℃ | -200~850℃ | ±0.15℃ | ±0.003℃ |
PT1000 | -200~850℃ | -200~850℃ | ±0.15℃ | ±0.005℃ |
CU50 | -50~150℃ | -50~150℃ | ±0.15℃ | ±0.005℃ |
CU100 | -50~150℃ | -50~150℃ | ±0.10℃ | ±0.003℃ |
Thermocouple Parameter at Normal Temperature (25℃)
Signal Type | Suggested Range (℃) | Accuracy |
mV | -100Mv~100mV | 0.05% |
B | 500℃~1810℃ | ±1.0℃ |
E | -200℃~1000℃ | ±0.4℃ |
J | -190℃~1200℃ | ±0.4℃ |
K | -200℃~1372℃ | ±0.4℃ |
N | -190℃~1300℃ | ±0.8℃ |
R | 0℃~1768℃ | ±1.0℃ |
S | 0℃~1768℃ | ±1.0℃ |
T | -200℃~400℃ | ±0.4℃ |
Dimension：
Installation：
Via positioning hole, use two screws to install the temperature module to temperature housing or rail.
How To Choose NCS-TT106 Temperature Module?
Selection Code Table
Wiring：
Fieldbus temperature module's power and bus signal share a pair of cable, and it is called bus cable. It is suggested the user use fieldbus special cable recommended by IEC61158-2.
The signal cable and bus cable cannot share wires or wire slot with other device power wire, and they shall be away from device with high power.
The shielded wires of bus ends shall be connected to the ground.
Related Products---NCS-TT106 Temperature Module：
FAQ
Q: What's Temperature Transmitter 2-wire zero point calibration configuration?
A: For 2-wire measurement, 2-wire zero point calibration can be realized by modifying transducer block TWO_WIRES_COMPENSATION parameter.
Q: Can I get the electronic manual?
A: Yes, please contact us.
Q: What type of cable should I use for wiring?
A: Fieldbus temperature module’s power and bus signal share a pair of cable, and it is called bus cable. It is suggested the user use fieldbus special cable recommended by IEC61158-2.
Q: Can you provided OEM service?
A: Yes, we can, such as communication board, we can also provided fieldbus development toolkit.
