Gateways

The product realizes the converter function from Modbus RTU to PROFIBUS PA, and it shall multiple devices with Modbus RTU protocol to PROFIBUS PA network.
G0307 Modbus to PA Gateway
1.Modbus-RTU protocol to PA protocol
2.Support PA3.02 specification
3.Support AI,AO,DI,DO standard function block
4.Support up to four Modbus devices

G0310 MODBUS to HART Gateway
1. Modbus-RTU protocol to HART protocol
2. Support 6 device variables and 4 dynamic variables
3. Support Modbus communication parameters dynamic configuration
4. Support HART multipoint mode
5. Support 375/475 trex communicator

G1003 Fieldbus HART to Modbus Gateway
1. HART protocol to Modbus-RTU/ASCII protocol
2. Hardware interface RS232/422/485
3. Configured as HART first master device or second master device
4. Can work in a point-to-point or multipoint mode
5. Connect up to 15 HART slave devices in multipoint working mode
6. All supported HART commands can be configured
7. Support HART burst mode

The product realizes the converter function from Modbus RTU to PROFIBUS PA, and it shall multiple devices with Modbus RTU protocol to PROFIBUS PA network. Modbus to PA Gateway is unique to Microcyber.
1. Modbus-RTU protocol to PROFIBUS PA protocol
2. Support PA profile 3.02
3. Support GSD 5.0 specification and standard EDD specification
4. Support AI, AO, DI, DO standard function block
5. Support up to 4 Modbus devices

Modbus to FF Gateway--G0313 is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to FF Gateway communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to FF device variable output.
1. Modbus-RTU protocol to FF H1 protocol
2. Comply with FF H1 protocol
3. Support LinkMaster function
4. Support standard DD specification
5. Support up to 4 Modbus devices

G1013 HART to FF Gateway
1. HART protocol to FF H1 protocol
2. Support HART 7 protocol and backward compatible
3. Support up to 4 HART slave devices
4. Support 4 AI and 1 PID function block

G0310 MODBUS To HART Gateway
G0310 Modbus to HART Gateway, designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It can convert device data to HART device variables output, and it also supports 4~20mAcurrent output.

G0306 Brief Instruction
This gateway realizes the conversion function from Modbus RTU to PROFIBUS DP, making multiple slave station devices that conform to Modbus RTU communication regulation access to PROFIBUS DP network.
1. Modbus-RTU protocol to PROFIBUS DP protocol
2. Standard DP interface, baud rate self-adapting, support up to 12Mbps
3. Support up to 244 byte input/output
4. Configure Modbus communication parameters by GSD
5. Modbus side can be both master and slave station

G0310 Modbus to HART Gateway, designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It can convert device data to HART device variables output, and it also supports 4~20mAcurrent output.