NCS-TT105 supports HART, FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.

HART temperature board MS0210, using the fieldbus technology, is a new generation of smart temperature module and it is an indispensable field device for process control. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.

Temperature Transmitters

NCS-TT108 smart temperature transmitter, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT108 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.

A temperature transmitter is an instrument that converts a temperature variable into a transmittable standardized output signal, and is mainly used for the measurement and control of industrial process temperature parameters. The current transmitter converts the AC current of the main circuit under test into a standard signal of constant current loop, and sends it to the receiving device continuously.

The temperature transmitter is mainly used for temperature measurement, and the following aspects should be paid attention to when selecting models.

The role of temperature in the transmitter For the temperature range of the temperature transmitter, usually a transmitter will calibrate two temperature ranges, that is, the normal operating temperature range and the temperature compensable range. The normal operating temperature range refers to the temperature range when the transmitter is not damaged under working conditions. When the temperature compensation range is exceeded, the performance index of its application may not be achieved. The temperature compensation range is a smaller range than the operating temperature range. typical range. Working within this range, the transmitter will definitely achieve its due performance.

The installation environment of the integrated temperature transmitter must be within -20-+70°C. When the ambient temperature is too high, the signal converter and display module can be installed separately from the thermal resistance or thermocouple. To be equipped with a special explosion-proof box for separately mounting the transmitter.

How to solve problems encountered in the use of intelligent temperature transmitter

NCS-PT105Ⅱ series Smart Pressure Transmitter supports HART, FF, and PA protocol and can measure pressure, differential pressure, liquid level, flow, and other industrial parameters. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc..