In the general sense, the pressure transmitter is mainly composed of three parts: sensor sensor (also known as pressure sensor), measurement circuit and process connector. It can transform the physical pressure parameters that the pressure measurement component sensor feels into the physical pressure parameters of the gas, liquid and other physical pressure parameters into a standard electrical signal (such as 4 ~ 20madc, etc.) to provide the second instrument such as the alarm, the recorder, the regulator and other second instruments for measurement and instructions. Process adjustment

APC3 is a fieldbus dedicated chip for the development of PROFIBUS DP intelligent slaves, supporting the complete DPV0 protocol. APC3 is fully compatible with SPC3LV and VPC3 working in DPV0/3.3V/1.5K dual-port RAM mode.

As intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal.

NCS-IF105 converter Quadruple Channel Current 4-20mA to Fieldbus Converters As intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces the expense of installation and maintenance.

Microcyber G1100 WirelessHART intelligent gateway has passed FCC and IC international certification.

Both the sensor and the transmitter play an important role in the field of automatic control. The transmitter is developed from the sensor. They are both related and different. Next, I will simply share it with you.

Temperature transmitter is a commonly used measuring instrument, using thermocouple and thermal resistance as temperature measuring elements.

Application of Differential Pressure Transmitter Basic situation The electrolytic repolarization cell is the first forced circulation ionic membrane electrolysis device put into operation in a factory, with a designed annual output of 2x10⁴t caustic soda. The main equipment is two MBC ion membrane electrolyzers, the working medium is: brine, magnetism, chlorine, hydrogen. The device was put into use in January 2008.

Measuring instruments in Bulk Cryogenic Tank Level Monitoring are used to measure the level of cryogenic liquified gases.Differential pressure is a simple and reliable way to monitor the liquid level in cryogenic gas tanks. These sensors work by measuring the pressure at both the top and bottom of the tank and calculating the pressure difference of the two ends.

Microcyber mainly provides Pressure Transmitter, Temperature Transmitter, Communication PCB, Communication Chip, Signal Converter, Control System and accessories with FF, PA and HART protocols for industrial process control solution.Our NCS-PT105 pressure transmitter (FF) and NCS-FI105 fieldbus to current converter (FF) have passed integration test with ABB control system.