Microcyber Corporation introduces more details on Fieldbus, Profibus and HART devices and technologies at Hannover Messe 2024.

Glory moment CIB Micro won the "Excellence Member Award" of PI-China Association!

The junction box is one of the safest elements of the automation system which we think will not face any issues. The components like terminal blocks, cards, etc. installed in the junction box will not face any problems because of the surrounding atmospheric conditions. But for this, there are certain things that need to be done in the junction box.

Microcyber's NCS-PT105ⅡS series of intelligent pressure transmitter adopts advanced, mature and reliable piezoresistive silicon pressure sensor, combined with advanced microprocessor technology and digital capacitance measurement technology to make it carefully designed.

MC0310 Modbus to HART Built-in Core Module is one of the M series built-in modules developed by Microcyber. The MC0310 is designed to convert a Modbus slave device into a HART slave device by embedding it into a user device with Modbus RTU communication capability.

NCS-TT106 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.

HT1200M is a low-power modem chip that can be used in HART devices, which only needs a small number of external components to complete the modulation and demodulation of HART signals.

NCS-PT105Ⅱ series Smart Pressure Transmitter supports HART, FF, and PA protocol and can measure pressure, differential pressure, liquid level, flow, and other industrial parameters. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc..

In the general sense, the pressure transmitter is mainly composed of three parts: sensor sensor (also known as pressure sensor), measurement circuit and process connector. It can transform the physical pressure parameters that the pressure measuring component sensor feels into a standard electrical signal (such as 4 ~ 20madc, etc.) to supply the alarm, recorder, regulator and other second instruments such as the alarm, recorder, regulator and other second instruments.

In the general sense, the pressure transmitter is mainly composed of three parts: sensor sensor (also known as pressure sensor), measurement circuit and process connector. It can transform the physical pressure parameters that the pressure measurement component sensor feels into the physical pressure parameters of the gas, liquid and other physical pressure parameters into a standard electrical signal (such as 4 ~ 20madc, etc.) to provide the second instrument such as the alarm, the recorder, the regulator and other second instruments for measurement and instructions. Process adjustment