NCS-TT106 Head Mounted Temperature Transmitter
- : Microcyber
- : Liaoning, China
- : In Stock
- : 500 Sets/Month
NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT106 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.
1. Support the latest versions of FF H1, PROFIBUS PA and HART protocols
2. Support 6 types of thermal resistance and 8 types of thermocouple
3. Support 2-channel sensor input
4. Thermal resistance supports 2-wire, 3-wire and 4-wire
5. The cold end compensation accuracy of thermocouple is ±0.5 ℃
6. High precision (better than grade 0.1), low temperature drift (better than ±50ppm/℃ )
7. Comply with FCG interoperability specification (ITK 6 and HART 7), PNO interoperability test certification (PA profile 3.02)
8. Explosion-proof (intrinsically safe, flameproof) certification
Description
NCS-TT106 Head Mounted Temperature Transmitter, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT106 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.
NCS Series of Intelligent Transmitters are digital, intelligent, network-based, merged with advanced, reliable and stable sensor technology, to be designed as a new generation of Fieldbus Intelligent Transmitter.
NCS Series of Intelligent Transmitter have been designed with high precision and high reliability, high stability. The pressure, temperature, currents and other physical quantities are displayed on LCD module. Zero drift, range settings and many other functions, are realized by the magnetism bar operation. The interoperability between different systems and equipments are realized by the Equipment Description Document, which is compatible to a variety of device management software, and adapting to harsh electromagnetic environment. NCS Series of Intelligent Transmitter have been used in inflammable and explosive places according to Intrinsically Safety Design.
NCS-TT106 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.
Features
NCS-TT106 Head Mounted Temperature Transmitter
Support multiple thermal resistances and thermocouples；
Thermal resistance supports 2/3/4-wire connection mode；
Thermocouple can use cold end compensation function；
Basic Parameter
Basic Parameters | |
Bus Power Supply | 9～32VDC Current consumption (static)：≤14mA（FF/PA） |
Input Signal | Pt100, Pt1000, Cu50, Cu100 Ω, 0, 0 to 500 ~ 4000 Ω Resistance |
The Channel Number | Single Channel |
Fieldbus Protocol | FF/PA/HART |
Insulation | Between the Terminal and the Housing：500Vrms（707VDC） |
Operating Temperature | -40℃～85℃ |
Humidity Range | 0%～95%RH |
Starting Time | ≤5secs. |
Turnover Time | 0.5secs. |
Electromagnetic Compatibility | In Line with the GB/T 18268-2010 |
Explosion-Proof Sign | Ex ia IIC T4 Ga（HART） |
NCS-TT106 Head Mounted Temperature Transmitter
Input Signal | Pt100、Pt1000、CU50、CU100、0～500Ω、0～4000Ω B，E，J，N，K，R，S，T eight kinds of Thermocouple -100mV～100mV voltage signal |
Channel | Single |
RTD Wiring | 2-wire, 3-wire, 4-wire |
Bus Power | HART: 11～35 VDC |
Bus Signal | HART，current mode |
Electric isolation | 1000VAC |
Working Temperature | -40℃～85℃ |
Humidity Range | 5%～95%RH |
Start Time | ≤5s |
Refresh Time | 0.5s |
EMC | GB/T 18268.1-2010 |
Protection | Terminal IP00, housing IP40 |
Voltage effect | ±0.005%/V |
Alarm signal | Alarm output can be set as 3.5…23 mA Upper/lower limit current 20.8mA / 3.8mA |
Current accuracy | 0.03% |
NCS-TT106F Foundation Fieldbus
Bus interface | FF |
Bus power | 9～32VDC |
Input Signal | Pt100、Pt1000、CU50、CU100、0～500Ω、0～4000Ω Resistance; B E J K N R S T Thermocouple、-100mV～100mV、Custom defined TC、Custom defined RTD |
Channel | Single |
RTD Wiring | 2-wire, 3-wire, 4-wire |
Refresh Time | 0.5s |
Working Temperature | -40～85℃ |
Storage temperature | -40～85℃ |
Humidity Range | 5～95%RH |
Electric isolation | 1000VAC |
Voltage effect | ±0.005%/V |
Protection | Terminal IP00, housing IP40 |
EMC | GB/T 18268.1-2010 GB/T 18268.25-2010 |
RTD Parameter
RTD Parameter at Normal Temperature（25℃）
Signal type | Suggested range | Accuracy（25℃） | Temperature drift（per ℃） |
Resistance Signal | 0~500Ω | ±0.04Ω | ±0.001Ω |
0~ 4000Ω | ±0.35Ω | ±0.015Ω | |
PT100 | -200~850℃ | ±0.15℃ | ±0.003℃ |
PT1000 | -200~850℃ | ±0.15℃ | ±0.005℃ |
CU50 | -50~150℃ | ±0.15℃ | ±0.005℃ |
CU100 | -50~150℃ | ±0.10℃ | ±0.003℃ |
Thermocouple
Thermocouple Parameter at Normal Temperature（25℃）
Signal type | Suggested range | Accuracy（25℃） | Temperature drift（per ℃） |
mV | -100mV~+100mV | ±0.025mV | ±0.001 mV |
B | 500℃~1810℃ | ±0.77℃ | ±0.050℃ |
E | -200℃~1000℃ | ±0.20℃ | ±0.025℃ |
J | -190℃~1200℃ | ±0.35℃ | ±0.01℃ |
K | -200℃~1372℃ | ±0.40℃ | ±0.025℃ |
N | -190℃~1300℃ | ±0.50℃ | ±0.015℃ |
R | 0℃~1768℃ | ±0.75℃ | ±0.023℃ |
S | 0℃~1768℃ | ±0.70℃ | ±0.023℃ |
T | -200℃~400℃ | ±0.35℃ | ±0.015℃ |
Dimension
Temperature Module Dimension (Unit: mm)
Installation
Via positioning hole, use two screws to install the temperature module to temperature housing or rail.
Wiring
Fieldbus temperature module’s power and bus signal share a pair of cable, and it is called bus cable. It is suggested the user use fieldbus special cable recommended by IEC61158-2.
The signal cable and bus cable cannot share wires or wire slot with other device power wire, and they shall be away from device with high power.
The shielded wires of bus ends shall be connected to the ground.
Application
Certificates
FAQ
Q: What’s Temperature Transmitter 2-wire zero point calibration configuration?
A: For 2-wire measurement, 2-wire zero point calibration can be realized by modifying transducer block TWO_WIRES_COMPENSATION parameter.
Q: Can I get the electronic manual?
A: Yes, please contact us.
Q: What type of cable should I use for wiring?
A: Fieldbus temperature module’s power and bus signal share a pair of cable, and it is called bus cable. It is suggested the user use fieldbus special cable recommended by IEC61158-2.
Q: Can you provided OEM service?
A: Yes, we can, such as communication board, we can also provided fieldbus development toolkit.
Hot Products
